Welcome to my little corner of the blogosphere to share the ups and downs of starting a craft business, with plenty of tips, mishaps and the odd glass of wine!

Saturday 27 August 2016

How to Make a Willy Wonka Golden Ticket Costume for World Book Day

Who loves Charlie & The Chocolate Factory?

Who knew that this year is the centenary of Road Dahl?

He was born on September 13 1916 and so to mark his 100th Birthday I've created this Charlie & The Chocolate Factory dressing up costume!

AHA! I hear you exclaim. She promised to show us this back in FEBRUARY when the costume was originally made for Patrick (Aged 5) to wear to school and it's taken till August to get round to posting it - I know and I'm sorry! My bad.

So here's the finished costume on a VERY excited Patrick:


You Will Need:

Large rectangle of thick felt - size according to the person you are making the costume for.
Large rectangle of gold felt (same size as thick felt)
Large piece of gold material (at least 2" larger than thick felt)
Black felt for lettering
Iron on fusible interfacing (bondaweb or similar)
4 pieces of elastic for shoulder & waist straps
muslin cloth or cotton cloth for ironing
Sewing Machine
Fabric pen or tailor's chalk
Lots and lots and lots more pins!


How To:

1. Iron the fusible interfacing onto black felt, trace around the letters (the wrong way round) and cut out. Then iron the black felt letters onto the gold material according to the bondaweb instructions. For mine, it's simply, peel off the paper backing and iron on a hot setting with steam for 10 - 15 seconds on each piece. Make sure you use a cotton muslin or cloth on top of the felt & gold material as you don't want to cause iron marks on the shiny material.

2. If you have a really large piece of gold material then you can cut it into a rectangle after the letters are ironed in place. But if you have a piece of material already cut to size, make sure you center the letters on it. I held the gold material up against Patrick to make sure it wasn't too big/too small.

3. Take a large piece of thick felt and cut it to a rectangle 2 inches smaller than the gold material.

4. Pin the gold material onto the felt rectangle and tuck the excess behind the felt. Pin all the way round.

5. Realise that you needed to center your words to the middle of the rectangle... unpin and re-position. Then repin! D'oh!

6. Tack the gold fabric into place using a needle and long stitches. You will be removing these tacking stitches later, so make them large so they're easier to remove.

7. Cut a piece of gold felt to the same size and pin this onto the back of your gold material & thick felt piece. You now have 3 layers.

8. Machine stitch the 3 layers together, with the 4 pieces of elastic slipped in between the layers - 2 at the shoulders and two for the waist. To work out where these should go, hold the 'ticket' up to your wearer and mark with a fabric pen or chalk onto the gold felt.




9. Cut another piece of the thick felt and another slightly larger piece of the gold felt. Pin the gold felt in place over the thick felt, with the edges tucked under at the back. Machine stitch these together.

10. Finally, line up the front and back piece of the ticket (on against your wearer if you have another pair of hands to help you, or you can lay them down flat on the table/clean floor!) and pin the 4 pieces of elastic into place on the back piece of the ticket. Stitch these on by hand, making sure you go over them a couple of times or by machine, but the whole costume might be a bit unwieldy by then to manage on the machine.

And Ta-Daaaa! You have a Willy Wonka Golden Ticket Costume and hopefully a very happy little (or big!) wearer!



I'd love to see any pictures you take from making this costume - or any of our other patterns!

Visit our Tutorials page for more ideas and makes.

No comments:

Post a Comment

I really appreciate all comments made on the blog (it reminds me that I'm not talking to myself!) so just wanted to say thanks for adding your thoughts. Simmi x

Sharing Buttons